Free Shipping Worldwide - Factory Direct

Instructions

1. Bounce House / Obstacle Course Instruction

Introduction
Thank you for choosing an Inflatable-Zone inflatable.
Every bounce house and obstacle course is factory-built, safety-tested, and designed for long-term, reliable fun.
Please read these short instructions carefully before setup and use.

Note: Continuous airflow is required. Small pinholes or mild air seepage are normal. Always follow the blower and weight specifications.

Safety Guidelines

  • Adult Supervision: Always have a responsible adult present.

  • Anchoring: Secure the inflatable firmly with stakes or sandbags before use.

  • Weather: Do not operate in strong wind or heavy rain.

  • Safe Play:

    • No flips, rough play, or climbing walls.

    • Keep entrances and exits clear.

    • Do not enter or play while the unit is inflating.

  • Health: Not suitable for users with neck, back, or heart conditions.

  • Power Safety: Use grounded outlets and keep blowers dry.

  • Inspection: Check all surfaces for wear, damage, or moisture before use.

Setup & Operation

  1. Choose Location: Flat, dry, and free of debris.

  2. Inflation: Attach the blower securely and run continuously during play.

  3. Anchoring: Use all anchor points to prevent shifting.

  4. Monitoring: Keep blower intake clear; ensure stable airflow.

  5. After Use: Turn off blower, clean surface, and allow to dry before folding.

Care & Storage

  • Cleaning: Wipe with mild soap and water; avoid harsh chemicals.

  • Drying: Always dry completely to prevent mold.

  • Storage: Store in a cool, dry indoor place away from sunlight.

  • Repair: Use the provided patch kit for small leaks or tears.

  • Warranty: All inflatables include a 2-year factory warranty covering manufacturing defects.

2. Inflatable Water Slide Instruction

Introduction
Enjoy safe, refreshing fun with your Inflatable-Zone water slide — designed for both professional rentals and family use.
Every unit is made with PLATO PVC and factory-tested for strength and safety.

Key Safety Points

  • Adult Supervision: Always supervise children during play.

  • Anchoring: Secure the slide using stakes or sandbags before adding water.

  • Weather: Do not use in high winds or storms.

  • Slide Rules:

    • Slide feet-first only.

    • Wait until the previous user has exited before the next goes.

    • No sharp objects or footwear allowed.

  • Electrical Safety: Keep blowers and plugs dry.

  • Drainage: Ensure water can flow out freely to avoid pooling.

Setup & Use

  1. Surface: Level, smooth, and debris-free.

  2. Inflate: Connect blower and inflate evenly.

  3. Water Source: Attach a garden hose to the inlet spray line.

  4. Monitor: Check pressure and water flow during use.

  5. After Use: Turn off blower and hose, rinse, and dry completely before storage.

Maintenance & Storage

  • Cleaning: Rinse after each use; use mild detergent if needed.

  • Drying: Air-dry thoroughly before folding.

  • Storage: Store indoors, away from sunlight and moisture.

  • Inspection: Check seams and anchor points before each use.

  • Warranty: Covered by a 2-year factory warranty for material and stitching defects.

3. Water Games Instruction

General Safety

  • Water Use Only: Designed for floating or aquatic setups — do not use on dry ground.

  • Environment: Choose calm, clean water away from strong currents or boat traffic.

  • Visibility: Avoid nighttime or low-light use.

  • Capacity: Follow weight and user limits indicated on each product.

  • Safety Gear: All users must wear life jackets.

  • Children: Not suitable for users under 5 years old.

  • Supervision: Maintain constant adult supervision and even weight distribution.

Mooring & Anchor Setup

  • Open Water:

    • Select areas protected from wind and obstacles.

    • Use heavy anchors and vertical mooring lines for secure placement.

  • Pools or Parks:

    • Confirm adequate depth and clearance.

    • Use at least four elastic mooring lines attached to anchor eyes.

    • Professional installation is recommended for large units.

Note: Improper setup may cause damage or risk of injury. Always follow the anchoring instructions carefully.

Care & Storage

  • After Use: Clean surfaces with fresh water to remove chlorine or salt.

  • Drying: Fully dry before folding to prevent mildew.

  • Storage: Store in a dry, shaded, and ventilated space.

  • Inspection: Regularly check D-rings, handles, and seams for wear.

4. Bubble House Instruction

Overview
Our bubble houses are designed for clear visibility and unique photo or event setups.
Each unit is made from commercial-grade PVC and tested for airtight performance.

Setup Guidelines

  • Location: Place in shaded areas, away from direct sunlight or extreme heat.

  • Inflation:

    • Use a 1 HP blower for 10 ft models.

    • Do not keep fully inflated when not in use — open zippers slightly to reduce pressure.

  • Anchoring: Secure firmly with provided ropes or sandbags.

  • Power: Ensure a steady power source and dry surroundings.

Safety & Maintenance

  • Supervision: Always have a trained attendant present for rentals or public use.

  • Usage Time: Limit continuous operation to reduce internal air pressure.

  • Cleaning: Use a soft cloth and mild soap; avoid alcohol or chemical cleaners.

  • Storage: Keep in a dry, cool place and avoid folding while wet.